Electronics Fan 50 Plus Pins Ignitor Control Circuit Board 12V DC with Fan Control Fit for Suburban Atwood HydroFlame Furnace 7912-II, 7916-II, 7920-II, FA 79D, HF 80D,AFSD12, AFSD16,DFSD12111

【Compatible Models】FAN50 Plus Pins circuit boards Compatible with Suburban /Atwood/Hydro Flame Furnaces: 7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111, DFMD25111, DFMD30111, DFMD35111 DFSD12111, DFSD16111 and DFSD20111, 【Functions】The board can be used to upgrade older furnaces to add the Fan Control feature. FAN50 Plus Control Ignitor Board is designed to shut the fan motor off when the Ignitor board fails to sense a flame after three times ignition try.This way can reduce battery consumption and avoid unnecessary cold air blowing. After shutting off the fan motor, the FAN 50 Plus Pins will wait for 1 hour then repeat the whole sequence again before permanent shut., 【Attention】The "Fan Control" feature MUST BE USED FOR appropriate operation of this board. FAN50 Plus control boards is not supposed to be used in DuoTherm 900 series furnaces that have the thermostat in the ground circuit., 【Specification】Size: 3.2" x 4.25" Voltage：12 VDC Operation Flame Failure Response Time:0.8 seconds maximum Tries for lgnition: Three Operating Temperature: -40 to + 176°F(-40℃ to +80℃). The FAN50Plus RV ignition control board kit adopts high technology and undergoes multiple pre factory quality inspections., 【After-Sales Service】: We are committed to providing you with the satisfactory shopping experience. If you have any inquiries or require assistance, please don't hesitate to get in touch with us. Your satisfaction is always our priority.